Ingolstadt, Germany

Audi museum mobile: cable-free, drill-free audio for a temporary exhibition

Small speakers, big VROOOM.


How an Ecler WiLD wireless system, mounted on the lighting tracks of the Audi museum mobile and triggered by a motion sensor, greets visitors to the special exhibition “1-2-4-5-3: 50 Years of Audi Five-Cylinder Engines” with the roar of racing engines. No new cables, no drilling, and ready to come down in minutes.


A project made possible by NEEC Audio Deutschland, Ecler’s distributor in Germany.

Publication date

2026-11-17

Industry

Leisure

A journey through 50 years of five cylinders

The Audi museum mobile, the brand museum at the Audi Forum Ingolstadt, is hosting the special exhibition “1-2-4-5-3: 50 Years of Audi Five-Cylinder Engines” from 1 August 2026 to 28 February 2027, organised by Audi Tradition.

On the first floor, seven engines and 14 historic vehicles are on display. The journey runs from the 1976 Audi 100 5E, the first Audi with a five-cylinder engine, to the Audi TT RS and Audi RS 3, telling the story of five decades of engineering and an unmistakable sound.

Official images of the exhibition and the museum are available in the Audi museum mobile gallery on the Audi Media Center.

In an exhibition about an engine people recognise by ear, sound could not be an afterthought. The idea was to give visitors and groups an emotional welcome right at the entrance by staging the sound of the racing cars’ high-performance engines.

Why the Audi five-cylinder sounds the way it does

The exhibition title is the engine’s firing order: 1-2-4-5-3. According to Audi, the characteristic sound comes from the odd number of cylinders and this sequence, which alternates between neighbouring and distant cylinders at a firing interval of 144 degrees of crankshaft rotation.

The result is that deep, gritty “VROOOM” that many fans associate with the Audi quattro rally cars of the 1980s, and which returned in 2009 with the TT RS. For an audio system, reproducing this content convincingly means two things:

•            Low-frequency extension: the energy of a racing engine sits mainly in the low end. Without a subwoofer, the sound loses its body.

•            Enough level without distortion: the effect has to make an impact at the entrance without overwhelming the rest of the exhibition.

The brief: no cables, no building work, plenty of sound

A temporary exhibition works differently from a permanent installation. The museum set four clear requirements:

•            No new cabling: neither power nor LAN cables to the loudspeakers.

•            No changes to the building: no drilling, no wall plugs, no permanent fixings.

•            Fast installation and removal: next year the system must come down just as quickly and be set up again in another location.

•            A sound with real weight: the racing engine had to sound powerful, not like a small speaker imitating a race car.

The sound effect also could not run on a permanent loop. It had to start when visitors arrived and be adjustable to specific times, conditions or zones.

The solution: wireless audio on the lighting tracks

The museum’s ceilings were already fitted with powered lighting tracks. This existing infrastructure became the key to the project: the tracks power both the ceiling loudspeakers and the motion sensor, with no need to run power any other way.

For the audio signal, NEEC Audio Deutschland proposed Ecler’s WiLD (Wireless Long Distance) series, a wireless audio solution designed for retail, museums and commercial spaces. Ecler specifies a range of up to 150 metres in line of sight and up to 32 receivers per transmitter. This was not the system’s first appearance here: WiLD already runs in other areas of the Audi museum mobile and at the Audi Forum as in-store background music.

System components

•            WiLD-14: a self-powered 4” lamp-style loudspeaker with wireless audio reception. Its mounting system is compatible with standard ceiling lighting tracks, which also supply its power.

•            WiLD-SB18: a compact self-powered 8” subwoofer with wireless reception. Together with the WiLD-14 units, it provides the low end an engine sound needs.

•            WiLD-TX: the transmitter that communicates with every receiver and creates the WiLD network.

•            PLAYER ONE: a compact audio player with stereo output. It plays content from USB or microSD, internet streams and DLNA or AirPlay sources. Here it is triggered through its GPI input.

An invisible installation

The PLAYER ONE and the WiLD-TX were built into a column behind a digital signage display, out of visitors’ sight. The wireless signal passes through the wall cladding without any problems, so the transmitter did not need to be visible.

How the “ear-catcher” is triggered

The sound effect works as an audio hook: it plays when someone is there to hear it. The signal chain is simple:

1.         The RAVE-D radar sensor, powered from the lighting track, detects visitors approaching the entrance area.

2.         The sensor sends a contact signal to the PLAYER ONE’s GPI input.

3.         The PLAYER ONE starts the audio file with the engine sound.

4.         The WiLD-TX sends the signal wirelessly to the WiLD-14 units and the WiLD-SB18.

5.         The loudspeakers play the sound, and the system returns to standby.

Because the sensor is programmable, the museum can adjust when and where the effect is triggered, for example by time of day or detection zone, without touching the audio system.

NEEC Audio Deutschland: the partner who made it happen

NEEC Audio Deutschland is Ecler’s distributor in Germany. It works with consultants, system integrators and installers, supporting them in designing audio solutions for retail, hospitality, conference rooms, fitness and public spaces.

On this project, its knowledge of the WiLD series and of the earlier installations at the Audi museum mobile and Audi Forum made it possible to design a solution for a very specific brief: use the existing infrastructure, leave no trace on the building and deliver a sound that matches the exhibition.

Results: a small solution for big emotions

Everyone involved in the project highlighted how simple and fast the installation was, and how good it sounded. In practice, the system delivers:

•            No building work: no new power or network cables, no drilling, no permanent fixings.

•            Equipment out of sight: player and transmitter hidden in a column, and loudspeakers integrated into the tracks alongside the lighting.

•            Automatic, adjustable activation: the sound only plays when visitors arrive.

•            A reusable system: when the exhibition closes, the whole setup can be taken down and reinstalled elsewhere just as quickly.

•            Low end with presence: the WiLD-14 and WiLD-SB18 combination reproduces the engine sound with the weight the content demands.

“I am absolutely thrilled with this solution. Together with the subwoofer, the small loudspeakers on the ceiling sound better than many of the large speakers we have installed here.”

Stefan Felber, curator, Audi museum mobile

Frequently asked questions

How are the loudspeakers powered without running cables?

The WiLD-14 units mount directly onto the ceiling’s powered lighting tracks and draw their power from them. The audio signal arrives wirelessly from the WiLD-TX, so no audio or network cabling to the loudspeakers is needed.

Can a wireless audio system be used in a temporary exhibition?

Yes, and it is one of its most logical uses. Because no building work is required, the system goes up and comes down quickly and can be reused in the next exhibition or another space.

How does the sound start when visitors arrive?

The radar sensor detects visitors and sends a signal to one of the PLAYER ONE’s GPI inputs, which starts the audio file. The WiLD-TX then transmits it to every receiver in the network.

Can a 4” loudspeaker reproduce the sound of a racing engine?

On its own, its low-frequency output would be limited. In this project, the 8” WiLD-SB18 subwoofer completes the system and provides the low end that gives the sound its body.

Does the wireless signal pass through walls?

In this installation, the signal passed without issues through the wall cladding hiding the transmitter. The range of up to 150 metres stated by Ecler applies to line-of-sight conditions; with obstacles, real-world range depends on the materials and should be checked on each project.

Products installed in this space

WiLD-14

WiLD
View

WiLD-SB18

WiLD
View

WiLD-TX

WiLD
View

PLAYER ONE

LCD display | microSD | DLNA & Airplay | Streaming
View
Other Projects in Germany
Lacoste retail ecler audio system

Outlet Lacoste

Germany
View